RAM 2011 3500 Chassis Cab, Руководство пользователя

Страница: 55 / 92

• Block both the front and rear of the
wheel diagonally opposite of the
jacking position. For example, if
changing the right front tire, block
the left rear wheel.
Hub Caps/Wheel Covers — If Equipped
• The hub caps must be removed before raising the vehicle off the ground.
• For single rear-wheel (SRW) models, use the blade on the end of the lug
wrench to pry the hub cap off. Insert the blade end into the pry-off notch and
carefully pop off the hub cap with a back-and-forth motion.
• On models with dual rear wheels (DRW), position the hook on the jack handle
driver into the notch on the hub cap and pull out firmly. The hub cap should
pop off. The wheel skins can now be removed. For the front hub cap, use the
blade on the end of the lug wrench to pry the caps off. The wheel skins can
now be removed by using the flat end of the lug wrench to pry them off. Insert
the flat tip completely and using a back-and-forth motion, loosen the wheel
skin.
NOTE: Passengers should not remain in the vehicle when the vehicle is being
jacked.
Jacking And Tire Changing Instructions
• Remove the spare tire, jack and tools from the stored location.
• Loosen (but do not remove) the wheel lug nuts by turning them
counterclockwise one turn while the wheel is still on the ground.
• Assemble the jack and jacking tools. Connect the jack handle driver to the
extension, then to the lug wrench.
WHAT TO DO IN EMERGENCIES
53