RAM 1500 CLASSIC 2022, Руководство пользователя, Страница: 74 / 364

72 GETTING TO KNOW YOUR VEHICLE
HOOD
T
O
O
PEN
T
HE
H
OOD
To open the hood, two latches must be released.
1. Pull the hood release lever located below the
steering wheel at the base of the instrument
panel.
Hood Release
2. Reach into the opening beneath the center of
the hood and push the safety latch lever to the
left to release it, before raising the hood.
Safety Latch Location
T
O
C
LOSE
T
HE
H
OOD
In one continuous motion, pull down on the front
edge of the hood with moderate force until the
angle is below the crossover point (where the gas
props are no longer resisting) and let the hood
continue to fall closed from its own inertia.
TAILGATE
O
PENING
To open the tailgate, lift up on the handle and pull
the tailgate down.
C
LOSING
To close the tailgate, push it upward until both
sides are latched.
The tailgate can be locked using the key fob lock
button.
T
AILGATE
R
EMOVAL
NOTE:
Removing the tailgate will disable the rearview
camera function.
To remove the tailgate, follow the instructions
below:
1. Disconnect the wiring harness for the rear
camera and or power locks (if equipped)
Ú
page 73.
2. Unlatch the tailgate and remove the support
cables by releasing the lock tang from the
pivot.
NOTE:
Make sure tailgate is supported when removing
support cables.
WARNING!
Be sure the hood is fully latched before driving
your vehicle. If the hood is not fully latched, it
could open when the vehicle is in motion and
block your vision. Failure to follow this warning
could result in serious injury or death.
22_DS_OM_EN_USC_t.book Page 72