RAM 1500 CLASSIC 2020 Скачать руководство пользователя страница 85

Страница: 85 / 360

GETTING TO KNOW YOUR VEHICLE

OCKING

NLOCKING

Push and release the lock or unlock button on the

key fob to lock and unlock all doors, the tailgate

and the RamBox (if equipped). Refer to “Keys” in

this chapter for further information. The RamBox

storage bins can be locked using the vehicle key.

To lock and unlock the storage bin, insert the key

into the keyhole on the push button and turn

clockwise to lock or counterclockwise to unlock.

Always return the key to the upright (vertical)

position before removing the key from the push

button.

AFETY

ARNING

Carefully follow these warnings to help prevent

personal injury or damage to your vehicle:

RamBox Storage Bin Cover Emergency

Release Lever — If Equipped

As a security measure, a Storage Bin Cover

Emergency Release is built into the storage bin

cover latching mechanism.

Storage Bin Cover Emergency Release Lever

NOTE:

In the event of an individual being locked inside

the storage bin, the storage bin cover can be

opened from inside of the bin by pulling on the

glow-in-the-dark lever attached to the storage bin

cover latching mechanism.

XTENDER

— I

QUIPPED

The bed extender has three functional positions:



Storage Position



Divider Position



Extender Position

CAUTION!



Ensure cargo bin lids are closed and latched

before moving or driving the vehicle.



Loads applied to the top of the bin lid should

be minimized to prevent damage to the lid and

latching/hinging mechanisms.



Damage to the RamBox bin may occur due to

heavy/sharp objects placed in bin that shift

due to vehicle motion. In order to minimize

potential for damage, secure all cargo to

prevent movement and protect inside

surfaces of bin from heavy/sharp objects with

appropriate padding.

WARNING!



Always close the storage bin covers when your

vehicle is unattended.



Do not allow children to have access to the

storage bins. Once in the storage bin, young

children may not be able to escape. If trapped

in the storage bin, children can die from suffo

cation or heat stroke.



In an accident, serious injury could result if the

storage bin covers are not properly latched.



Do not drive the vehicle with the storage bin

covers open.



Keep the storage bin covers closed and

latched while the vehicle is in motion.



Do not use a storage bin latch as a tie down.

20_DS_OM_EN_USC_t.book Page 83

Содержание 1500 CLASSIC 2020









































































































































































































































































































































































Результаты поиска

Содержание 1500 CLASSIC 2020

Отзывы:

Похожие инструкции для 1500 CLASSIC 2020

Бренды по названию

Популярные бренды

RAM 1500 CLASSIC 2020, Руководство пользователя

Результаты поиска

Содержание 1500 CLASSIC 2020

Отзывы:

Похожие инструкции для 1500 CLASSIC 2020

Бренды по названию

Популярные бренды