RAM 1500 CLASSIC 2020 Скачать руководство пользователя страница 102

Страница: 102 / 360

100

GETTING TO KNOW YOUR INSTRUMENT PANEL



Down Arrow Button

Push and release the down arrow

button to scroll downward through

the main menu items, submenu

screen, and vehicle settings.



Right Arrow Button

Push and release the right arrow

button to access/select the informa

tion screens or submenu screens of a

main menu item. Push and hold the

RIGHT arrow button for two seconds to reset

displayed/selected features that can be reset.



Left Arrow Button

Push and release the left arrow

button to access/select the informa

tion screens, submenu screens of a

main menu item, or to return to the

main menu.

IFE

ESET

Your vehicle is equipped with an engine oil change

indicator system. The “Oil Change Required”

message will display in the instrument cluster

display after a single chime has sounded, to

indicate the next scheduled oil change interval.

The engine oil change indicator system is duty

cycle based, which means the engine oil change

interval may fluctuate, dependent upon your

personal driving style.

NOTE:

Use the steering wheel instrument cluster display

controls for the following procedure(s).
Vehicles Equipped With Passive Entry
1. Without pushing the brake pedal, push the

ENGINE START/STOP button and place the

ignition to the ON/RUN position (do not start

the engine).

2. Push and release the down arrow button to

scroll downward through the main menu to

“Vehicle Info.”

3. Push and release the right arrow button to

access the ”Vehicle Info” screen, then scroll up

or down to select “Oil Life.”

4. Push and hold the right arrow button to select

“Reset”.

5. Push and release the down arrow button to

select “Yes,” then push and release the right

arrow button to reset the Oil Life to 100%.

6. Push and release the up arrow button to exit

the instrument cluster display screen.

Vehicles Not Equipped With Passive Entry
1. Without pushing the brake pedal, cycle the

ignition to the ON/RUN position (do not start

the engine).

2. Push and release the down arrow button to

scroll downward through the main menu to

“Vehicle Info.”

3. Push and release the right arrow button to

access the “Vehicle Info” screen then scroll up

or down to select “Oil Life.”

4. Push and hold the right arrow button to select

“YES” by pushing the right arrow then push

and release the right arrow button to select

reset of the Oil Life to 100%.

5. Push and release the up arrow button to exit

the instrument cluster display screen.

NOTE:

If the indicator message illuminates when you start

the vehicle, the Oil Life indicator system did not

reset. If necessary, repeat this procedure.

ISPLAY

ENU

TEMS

Push and release the up or down arrow button until

the desired selectable menu icon is highlighted in

the instrument cluster display.

Speedometer

Push and release the up or down arrow button until

the speedometer menu item is highlighted in the

instrument cluster display. Push and release the

right arrow button to cycle the display between

mph and km/h.

20_DS_OM_EN_USC_t.book Page 100

Содержание 1500 CLASSIC 2020









































































































































































































































































































































































Результаты поиска

Содержание 1500 CLASSIC 2020

Отзывы:

Похожие инструкции для 1500 CLASSIC 2020

Бренды по названию

Популярные бренды

RAM 1500 CLASSIC 2020, Руководство пользователя

Результаты поиска

Содержание 1500 CLASSIC 2020

Отзывы:

Похожие инструкции для 1500 CLASSIC 2020

Бренды по названию

Популярные бренды