RAM 1500 2018 Скачать руководство пользователя страница 106

Страница: 106 / 700

Automatic Temperature Control (ATC) — If
Equipped

Automatic Operation

1. Push the AUTO button on the faceplate, or the AUTO

button on the touchscreen on the Automatic Tempera-

ture Control (ATC) Panel.

2. Next, adjust the temperature you would like the system

to maintain by adjusting the driver and passenger

temperature control buttons. Once the desired tempera-

ture is displayed, the system will achieve and automati-

cally maintain that comfort level.

3. When the system is set up for your comfort level, it is

not necessary to change the settings. You will experience

the greatest efficiency by simply allowing the system to

function automatically.

NOTE:

•

It is not necessary to move the temperature settings for

cold or hot vehicles. The system automatically adjusts

the temperature, mode, and blower speed to provide

comfort as quickly as possible.

•

The temperature can be displayed in U.S. or Metric units

by selecting the US/Metric customer-programmable fea-

ture. Refer to the “Uconnect Settings” in “Multimedia”

for further information.

To provide you with maximum comfort in the Automatic

mode during cold start-ups, the blower fan will remain on

low until the engine warms up. The blower will increase in

speed and transition into Auto mode.
Manual Operation Override
This system offers a full complement of manual override

features. The AUTO symbol in the front ATC display will

be turned off when the system is being used in the manual

mode.

Operating Tips

NOTE:

Refer to the chart at the end of this section for

suggested control settings for various weather conditions.

104 GETTING TO KNOW YOUR VEHICLE

Содержание 1500 2018





























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2018

Отзывы:

Похожие инструкции для 1500 2018

Бренды по названию

Популярные бренды

RAM 1500 2018, Руководство пользователя

Результаты поиска

Содержание 1500 2018

Отзывы:

Похожие инструкции для 1500 2018

Бренды по названию

Популярные бренды