Rally RE20H122 Скачать руководство пользователя страница 3

3

I. TRAINING

•  Read the instructions carefully.  Be familiar with the con-

 trols and the proper use of the equipment.

•  Never allow children or people unfamiliar with the in-

s truc tions to use the lawnmower.  Local regulations may 

restrict the age of the operator.

•  Never mow while people, especially children, or pets are 

nearby.

•  Keep in mind that the operator or user is responsible for 

accidents or hazards occurring to other people or their 

property.

   Do not carry passengers.
•  All drivers should seek and obtain professional and prac-

 ti cal instruction.  Such instruction should em pha size:

-   the need for care and concentration when work ing 

with ride-on machines;

-  control of a ride-on machine sliding  on a slope will 

not be regained by the application of the brake.

The main reasons for loss of control are:

a) insufficient wheel grip;
b) being driven too fast;
c) inadequate braking;
d) the type of machine is unsuitable for its task;
e) lack of awareness of the effect of ground 

conditions,especially slopes;

f)  incorrect hitching and load distribution.

 II. PREPARATION

•  To reduce the risk of fire - before use, when refueling and 

at the end of each mowing session - inspect and remove 

any debris buildup from the tractor, mower and behind al 

guards.

• 

While mowing, always wear substantial footwear and long 

trousers.  Do not operate the equipment when barefoot 

or wearing open sandals.

•  Thoroughly inspect the area where the equipment is to 

be used and remove all objects which may be thrown by 

the machine.

•  WARNING - Petrol is highly flammable.

-  Store fuel in containers specifically de signed for this 

pur pose.

-  Refuel outdoors only and do not smoke while re fu -

el ing.

-  Add fuel before starting the engine.  Never remove 

the cap of the fuel tank or add petrol while the engine 

is running or when the en gine is hot.

-  If petrol is spilled, do not attempt to start the engine 

but move the machine away from the area of spillage 

and avoid cre at ing any source of ig ni tion until petrol 

vapors have dis si pat ed.

-  Replace all fuel tanks and container caps securely.

•  Replace faulty silencers.
•  Before using, always visually inspect to see that the 

blades, blade bolts and cutter assembly are not worn or 

damaged.  Replace worn or damaged blades and bolts 

in sets to preserve balance.

•  On multi-bladed machines, take care as rotating one 

blade can cause other blades to rotate.

III. OPERATION

•  Do not operate the engine in a confined space where 

dan ger ous carbon monoxide fumes can collect.

•  Mow only in daylight or in good artificial light.
• 

Before attempting to start the engine, disengage all blade 

attachment clutches and shift into neutral.

•  Do not use on slopes of more than 5°.
• 

Remember there is no such thing as a “safe” slope.  Travel 

on grass slopes requires particular care.  To guard against 

overturning;

-  do not stop or start suddenly when going up or down-

 hill;

-  engage clutch slowly, always keep machine in gear, 

especially when traveling down hill;

-  machine speeds should be kept low on slopes and 

during tight turns;

-  stay alert for humps and hollows and oth er hidden 

haz ards;

-  never mow across the face of the slope, unless the 

lawnmower is designed for this pur pose.

•  Use care when pulling loads or using heavy equipment.

-  Use only approved drawbar hitch points.
-  Limit loads to those you can safely control.
-  Do not turn sharply.  Use care when re vers ing.
-  Use counterweight(s) or wheel weights when sug-

 gest ed in the instruction hand book.

•  Watch out for traffic when crossing or near roadways.
•  Stop the blades from rotating before crossing surfaces 

other than grass.

•  When using any attachments, never direct discharge of 

material toward bystanders nor allow anyone near the 

machine while in operation.

•  Never operate the lawnmower with defective guards, 

shields or without safety protective devices in place.

• 

Do not change the engine governor settings or overspeed 

the engine.  Operating the engine at excessive speed 

may increase the hazard of personal injury.

•  Before leaving the operator’s position:

-  disengage the power take-off and lower the at tach -

ments;

-  change into neutral and set the parking brake;
-  stop the engine and remove the key.

•  Disengage drive to attachments, stop the engine, and 

dis con nect the spark plug wire(s) or remove the ignition 

key

-  before cleaning blockages or unclogging chute;
-  before checking, cleaning or working on the lawn-

mower;

-  after striking a foreign object.  Inspect the lawnmower 

for damage and make repairs before re start ing and 

op er at ing the equip ment;

-  if the machine starts to vibrate abnormally (check 

im me di ate ly).

• 

Disengage drive to attachments when transporting or not 

in use.

1. Safety Rules

Safe Operation Practices for Ride-On Mowers

IMPORTANT: 

 THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS.  FAILURE 

TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

Содержание RE20H122





















































































Отзывы: