Rale Industries ST120 2021, Руководство пользователя

Страница: 19 / 47

15 2021 RALE® ST120 INSTALLATION GUIDE
Visual and Physical Inspection – After cleaning the RALE Track Kit,
inspect for the following; cracks, loose, damaged or missing parts,
and abnormal or excessive wear.
Bolt Torque – Re-torque all bolts as specified on page 13. Refer
to the part diagrams for torque specifications.
Primary Chain – Verify that the chain guide is aligned and does not
have excessive wear. Check the chain tension, wear and master
link; clean and lubricate as needed. Refer to the installation manual
to properly set or check the chain tension.
Secondary Chain – Check the chain slider for excessive wear;
adjust to the tighter hole if necessary. Check the chain wear and
master link; clean and lubricate as needed.
Sprockets – Check for abnormal or excessive wear due to
improper alignment or improper chain tension.
Track Tension – Refer to the installation manual to properly set or
check the track tension / alignment.
Track – Check for damage, wear on the lugs. Examine the metal
clips for excessive wear or missing clips.
Hyfax – Check for abnormal or excessive wear; the sides should
not be less than 17 mm tall.
Bogie Wheels – Check for side to side movement; indicating
bearing wear. Check the running surface for wear.
Rail Pivot Axle – Lubricate using Lucas
®
Marine Grease.
RALE recommends WPS PN 58-5297
Ski Skag – Check for broken or excessive wear of the carbide
edge.
Ski Saddle Bushing – Check for cracks or wear; the bushing
should provide support for the ski tower, preventing the ski from
being loose or floppy.
Brake System – Check the hydraulic fluid level, check the pads for
excessive wear, and check the brake rotor for warping.
Side Link Rod Ends – Use Motorex
®
Silicone Spray on the (4) rod
ends on the Side Links. RALE recommends WPS PN 580-0414
Upper Link Rod Ends – Use Motorex
®
Silicone Spray, RALE
recommends WPS PN 580-0414, the rod end located at the top
of the upper link. Lubricate the lower joint using Lucas
®
Marine
Grease. RALE recommends WPS PN 58-5297