RAKwireless RAK4600, Быстрый старт

Страница: 14 / 23

Documentation Center
Bluetooth Connection Modes
There are three BLE modes in RAK4600 from the firmware V3.0.0.6 on, the Peripheral Mode, the Central Mode
and the Beacon Scan Mode. You can change the work mode of RAK4600’s BLE using the commands provided
below which is defined
here
RAK4601 Pin
Definition
Function
Name of
WisBase
Pin
Number Pin
Number
Function
Name of
WisBase
RAK4601 Pin
Definition
NC VBAT 1 2 VBAT NC
GND GND 3 4 GND GND
3V3 3V3 5 6 3V3 3V3
NC USB+ 7 8 USB- NC
NC VBUS 9 10 SW1 NC
UART1_TX/P0.23 TXD0 11 12 RXD0 UART1_RX/P0.22
MCU_RST RESET 13 14 LED1 NC
NC LED2 15 16 LED3 NC
3V3 VDD 17 18 VDD 3V3
I2C1_SDA/P0.13 I2C1_SDA 19 20 I2C1_SCL I2C1_SCL/P0.12
NC AIN0 21 22 AIN1 NC
NC BOOT0 23 24 NC NC
NC SPI_CS 25 26 SPI_CLK NC
NC SPI_MISO 27 28 SPI_MOSI NC
IO1/RESERVED IO1 29 30 IO2 IO2/RESERVED
NFC1/P0.09 IO3 31 32 IO4 NFC2/P0.10
UART2_TX/P0.19 TXD1 33 34 RXD1 UART2_RX/P0.18
NC I2C2_SDA 35 36 I2C2_SCL NC
NC IO5 37 38 IO6 NC
GND GND 39 40 GND GND