Step 3
Remove the top tray by
disconnecting the ribbon cable
and screws
Fix the lower tray into the wall
mounted metal housing using the
screws indicated in the diagram.
Step 4
Wire the mains supply into the
terminal block.
Insert the RJ45 cable that links
the RAK-LINK to a stack of
RAKs.
Prepare two remaining screws to
be slotted into top tray
Step 5
Reattach the ribbon cable
between the top and bottom
board
Slot the top tray into the bottom
tray and screw down
Step 6
Punchdown the CAT5 to wired
network to complete installation.
If required plug devices (for
example Bridges) into the RJ11
ports
RAK-LINK
Manual Version 2.1.7
