RAK WisBlock RAK19010, Быстрый старт, Страница: 8 / 29

Documentation Center
Figure 19: Removing screws from the WisBlock module
2. Once the screws are removed, on the PCB of a WisBlock module, there is a silkscreen that shows the correct
location where force can be applied. By applying even force under the marked area, the module can be
detached from the Base Board. See Figure 20 and Figure 21.
Figure 20: Detaching silkscreen on the WisBlock module
Figure 21: Applying even forces on the proper location of a WisBlock module to detach the module from the Base Board
Software Setup
The WisBlock Core is designed to be interfaced with other WisBlock Modules like sensors, displays, and other
interfaces. To make useful devices, you need to upload a source code to the WisBlock Core. Before you continue,
you should have already set up either an
Arduino BSP or PlatformIO .