Documentation Center
Environmental monitoring
Wireless data transmission
Data acquisition in the industrial environment
Location and tracking of personnel or moving objects
Specifications
Overview
There are seven (7) slots on RAK19010 WisBlock Base Board with Power Slot:
CPU SLOT: This slot is reserved for the WisBlock Core module which has the main MCU.
Power SLOT: This slot is required to provide power to WisBlock Core and modules.
IO SLOT: This slot is used for IO extension modules.
Four Sensor Slots: The sensor slots A to D are used to connect with the I2C bus. Slots A and D can be used
for GNSS modules, too.
Also, there are pin headers 2.54 mm pitch for the extension interface that connects to BOOT, I2C, UART, ADC,
and GPIO pins.
Figure 1: RAK19010 WisBlock Base Board with Power Slot top view
Figure 2: RAK19010 WisBlock Base Board with Power Slot bottom view
Block Diagram
The block diagram in Figure 3 shows the internal architecture and external interfaces of the RAK19010 board.
