Code
Firmware Upgrade Codes (1*)
541
Software error
55
Low memory - automatic reboot scheduled.
56
APT peer bridge settings do not match
57
logwatcher start timeout
Code
Battery Gas Gauge Codes (6*)
61
Battery gas gauge i2c device could not be found.
62
Incorrect gas gauge revision 1 EEPROM settings.
63
Incorrect gas gauge revision 2 EEPROM settings.
64
Incorrect gas gauge revision 3 EEPROM settings.
65
Unknown gas gauge revision.
66
Incorrect ME3 gas gauge revision 0 EEPROM settings.
67
Internal battery charger disabled.
Code
Other Codes (7
, 8
, 9*)
71
Host flapping detected.
72
Critical I2C failure.
73
Invalid channel configured.
74
Bad factory configuration.
741
Signing key installation failure.
75
Unsupported hardware component.
76
Potential loop detected, turned off port
77
Model is not supported in this version of firmware. Contact support.
81
reserved
811
Default Network Key is in use.
82
reserved
83
reserved
84
reserved
85
reserved
