background image

BASS

Adjust for 13 dB of shelving boost or cut below 500 Hz. Flat at 12 o’clock.

Your tone does not get muddy when boosting and your upper midrange is unaf-

fected by this control. Great for compensating for the variations in bass energy

of different guitars and pickups.

TREBLE

Adjust for 13 dB of shelving boost or cut above 1 kHz. Flat at 12 o’clock.

Your tone does not get harsh when boosting and your upper midrange does not

lose presence when cutting. Try turning this up as well as the bass for a sparkly

scooped sound.

REVERB

Adjusts the level of the return signal from the spring reverb tank. The re-

verb tank is driven by a mixed feedback discrete amplifier and has been carefully

voiced to add a lot of sparkle and depth while eliminating mud. This makes the

reverb equally suited to the lead as the clean channel, and it is intended to be

used as an “always on” effect.

VOLUME

This master volume control drives a high quality compressor situated at the

input of the power amplifier. At high volume the compressor is engaged and

acts to transparently prevent hard clipping of the power amp. The compressor is

designed to be defeated by loud transient peaks so they can be clipped cleanly by

the custom engineered discrete power amplifier circuit which continues to sound

amazing when pushed hard, like a guitar amplifier should.

POWER

Switch for turning the unit on or off. It is normal for there to be no sound

immediately after powering on the amp (while the valves are heating up). This

warm-up period may last 10-15 seconds. Turn the amplifier off if it is not being

used for longer than 45 minutes.

5

Содержание VOD-50











Отзывы: