Raisecom RCMS2304-240, Руководство пользователя

Страница: 13 / 22

Raisecom Technology Co., Ltd
12
4.1.5. Ethernet interface
•
Each RJ45 interface corresponds to one Ethernet port. Refer to Appendix A for wire
sequence.
•
Each port is capable of 10/100Mbps auto-sensing
•
MDI/MDIX auto-negotiation
4.1.6. RS232 auxiliary data channel
Comply with RS232 standard, use and RJ45 connector. Refer to appendix A for wire
sequence.
4.1.7. LINK UP network management port
LINK UP port can be connected with the serial port of computer. The connection standard
is optional between RS232 and RS485.
•
LINK UP port: RJ45 connector. It adopts RS485 or RS232 (19.2kbps) standard.
4.2. Introduction of back panel
Figure: Sketch of RCMS2304-240 of back panel
4.2.1. Optical interface
z Single strand, SC/PC connector
4.2.2. E1 interface
A DB37 male connector on the back panel provides 1~4
th
E1 tributary ports. Refer to
Appendix A for wire sequence.
z
CC4B-8G type of adapter for conversion from DB37 to 8 CC3s is needed for using 75 Ω
connection. There are 1~4
th
E1 tributaries from left to right, where the “OUT” above and
“IN” below.
z
No need adapter for using 120 Ω connection