Raisecom ISCOM RAX711 Скачать руководство пользователя

Страница: 26 / 67

Raisecom
ISCOM RAX711 (B)Product Description

Raisecom Technology Co., Ltd.

LED

Status

Description

SPEED

(0/1–0/2)

Green

Uplink interface working rate LED



Green: the interface is working at 1000 Mbit/s.



Off: the interface is working at 100 Mbit/s or stops working.

SPEED

(1/1–1/4)

Green

Downlink interface working rate LED



Green: the interface is working at 1000 Mbit/s.



Off: the interface is working at 10/100 Mbit/s or stops
working.

LNK/ACT
(SNMP)

Green

SNMP interface working LED



Green: the SNMP interface is properly connected.



Blinking green: the SNMP interface is receiving or sending
data.



Off: the SNMP interface is disconnected or improperly
connected.

100M
(SNMP)

Green

SNMP interface rate LED



Green: the SNMP interface rate is 100 Mbit/s.



Off: the SNMP interface rate is 10 Mbit/s or the SNMP
interface is not working.

PWR1/PWR2 Green

Power LED



Green: the power supply is normal.



Off: the power supply is off or abnormal.

MGT

Green

System working status LED



Slow blinking green (every 5s): after the system starts, it has
not loaded the configuration file and auto-provisioning has
not been complete.



Blinking green (every 3s): the system has successfully loaded
the configuration file, and auto-provisioning has been
complete.



Fast blinking green (every 0.5s): auto-provisioning is being
deployed or abnormal.

SYS

Green

System working LED



Green/Off: the system is working improperly.



Blinking green: the configuration file is not loaded, or the
system is working improperly.

LOS

Green

Clock LOS LED



Green: LOS occurs on the clock signal input interface or the
interface is disconnected.



Off: no LOS occurs on the clock signal input interface.

3.4 Hardware logic structure

Table 3-6 shows the hardware logical structure of the ISCOM RAX711.

Содержание ISCOM RAX711




































































Результаты поиска

Содержание ISCOM RAX711

Отзывы:

Похожие инструкции для ISCOM RAX711

Бренды по названию

Популярные бренды

Raisecom ISCOM RAX711, Описание продукта

Результаты поиска

Содержание ISCOM RAX711

Отзывы:

Похожие инструкции для ISCOM RAX711

Бренды по названию

Популярные бренды