Raisecom
Gazelle S1512i-PWR (A) User Manual
8
Appendix
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
54
Simple
Network Time
Protocol
(SNTP)
SNTP is mainly used for synchronizing time of devices in the network.
Single-Mode
Fiber (SMF)
In this fiber, single-mode optical signals are transmitted.
Spanning Tree
Protocol (STP)
STP can be used to eliminate network loops and back up link data. It
blocks loops in logic to prevent broadcast storms. When the unblocked
link fails, the blocked link is re-activated to act as the backup link.
V
Virtual Local
Area Network
(VLAN)
VLAN is a protocol proposed to solve broadcast and security issues for
Ethernet. It divides devices in a LAN into different segments logically
rather than physically, thus implementing multiple virtual work groups
which are based on Layer 2 isolation and do not affect each other.
VLAN
mapping
VLAN mapping is mainly used to replace the private VLAN Tag of the
Ethernet service packet with the ISP's VLAN Tag, making the packet
transmitted according to ISP's VLAN forwarding rules. When the
packet is sent to the peer private network from the ISP network, the
VLAN Tag is restored to the original private VLAN Tag according to
the same VLAN forwarding rules. Thus, the packet is sent to the
destination correctly.
8.2 Acronyms and abbreviations
A
AAA
Authentication, Authorization, and Accounting
ABR
Area Border Router
AC
Alternating Current
ACL
Access Control List
ANSI
American National Standards Institute
APS
Automatic Protection Switching
ARP
Address Resolution Protocol
AS
Autonomous System
ASE
Autonomous System External
AWG
American Wire Gauge
B