Raisecom
Gazelle S1503i (A) User Manual
2
Hardware structure
Raisecom Technology Co., Ltd.
21
Figure 2-12
Wiring of the 1000 Mbit/s crossover cable
2.7.3 Serial cable
Introduction
The serial cable is used to connect the serial interface of the Gazelle S1503i to the peer device.
It transmits status information and data collected from devices, such as sensors, detectors,
Programmable Logic Controllers (PLCs), and intelligent terminals, to the standard TCP/IP
network.
The Gazelle S1503i supports RS-232 and RS-485 half duplex serial interface modes.
Appearance
Figure 2-13 shows the serial cable
Figure 2-13
Serial cable
PIN definitions
Table 2-21 lists PIN definitions of the RS-232/RS-485DB-9 serial interface.