Raisecom
Gazelle S1000i-LI (A) User Manual
4 Hardware installation
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
57
4.4 Connecting cables
4.4.1 Connecting LC/PC fiber
When the Gazelle S1000i-LI is not used, you should put a dustproof cover on the
optical interface to prevent dust and dirt from entering it to ensure that the Gazelle
S1000i-LI works normally.
There is invisible laser in the Gazelle S1000i-LI, which may cause eye injury.
Therefore, you should not look directly at the optical interface, header of the optical
connector, or breakage of the fiber.
Connect the LC/PC fiber as below:
Step 1
Insert the SFP optical module into the optical interface on the Gazelle S1000i-LI.
Step 2
Remove the dustproof covers of the optical module and fiber, and keep it for later use.
Step 3
Align the connector with the optical interface to insert the fiber into the optical interface
gently.
Step 4
To remove the fiber, push the fiber connector inwards slightly, and pull out the fiber.
4.4.2 Connecting Ethernet cable
Connect the Ethernet cable as below:
Step 1
Make the Ethernet cable according to specifications.
Step 2
Align the Ethernet cable header with the Ethernet interface of the Gazelle S1000i-LI and
insert the Ethernet cable into the Ethernet interface gently, as shown in Figure 4-20.
Figure 4-20
Connecting the Ethernet cable