N-Series
3D Printer
/ Quick Start Guide
C
Hardware Installation
Cut the 5 zip ties that are securing the
clips and the print head.
1
3
Remove!
(×2)
Hex Wrench
(3 mm)
Unscrew the 2 screws on each of the two
clamps holding the Z-axis in place. Use the
3mm Hex wrench which was shipped
attached to the print platform.
Please remove the 12 clips holding the
extruder assembly in place before power-
ing on your printer. If you fail to remove
these clips your printer will be damaged.
Please save these clips and re-install them
if you transport your printer.
Remove!
2
(×12)
(×5)
Remove!
