RAIS Visio 70 F, Руководство пользователя

Страница: 7 / 26

7
GB
INTRODUCTION
SOFTWARE VERSION
Press the buttons and at the
same time. The software version is now
displayed.
MODEL NUMBER FOR THE REMOTE
CONTROL
Press the buttons and at the same
time. The model number of the remote
control is now displayed.
CODE GENERATION
A code is selected automatically for all Maxitrol electronics from
among 65,000 codes available. The receiver must be paired with a
handset.
ANTENNA
The antenna must not cross or come into contact with the ignition
wire or any other cable. This will render the receiver inoperable.
POWER CONNECTION
The cable for the valve and receiver must be connected before
switching on. If this is not connected, the electronic system may be
damaged.
INTRODUCTION
REMOTE CONTROL OPTIONS
There are 2 options for operating a RAIS gas fireplace: a remote
control (with display) and a PUCK (without display).
REMOTE CONTROL
The remote control with a display is standard. With this remote
control, all the functions of the gas fireplace can be used. You get
the full experience of your gas fireplace.
Read how to use the remote control on page 10.
PUCK
The PUCK is optional and is ideal in areas where the gas fireplace
must be operated by several people in, for example, rental
properties, restaurants, receptions, etc.
Read how to use the PUCK control on page 18.
Remote control
(standard)
PUCK
(optional)