RAIS Nexo 100, Руководство по установке

Страница: 59 / 94

SERVICE AND MAINTENANCE
Service and maintenance
Learn how to service your gas fireplace in this section . The fireplace must be inspected by an authorised gas
installation technician in accordance with national legislation . The inspection must ensure that the fireplace
functions correctly and is safe to use .
Service procedure
Switch off the fireplace and shut off the gas supply . Make sure the fireplace is completely cold before you
begin . RAIS/ATTIKA cannot be held liable for injuries that result from touching a hot fireplace .
Service procedure proposal:
1 . Protect the floor by laying out a blanket or other covering .
2 . Remove the glass and carefully remove the ceramic logs and embers layer .
3 . Use a vacuum cleaner to clean the burner and the perforated plate .
4 . Raise and remove the secondary burner . Remove the perforated plate .
5 . Vacuum clean the entire burner .
6 . Clean the pilot burner assembly using a soft brush and a vacuum cleaner . Do not bend or straighten
the thermocouple .
7 . Switch on the gas supply and check for leaks . Check the burners and pilot unit to ensure that they are
in good working condition .
8 . Re-fit the perforated plate .
9 . Put back the embers layer and ceramic logs .
10 . Check the flue gas system and the flue terminal and ensure that they are not blocked .
11 . Fit the glass .
12 . Switch on the fireplace and check the pressure setting .
13 . Ensure that the fireplace is safe to use .
14 . Check that the gaskets are in good condition .
15 . Worn out parts should be replaced with new parts .
16 . Old “logs” and old “embers layers” can be placed in a plastic bag and disposed of with household
waste .
NB! Under no circumstances may you open your gas fireplace front cover – this may only be done by
an unauthorised heating and plumbing and gas installation technician .
GB - 59
GB