Even after cleaning by brush in
regular course, if light does not
pass, it is an indication of stubborn
dirt remains in the sieve and
blockage of screen. This may
hamper the filter efficiency,
releasing more discharge at drain
outlet.
Once cleaning is done, lift the
filter element and observe
under the sunlight, light should
pass through the filter element
sieve. If sunlight passes, re-
insert the filter element.
Содержание FL-80
Страница 14: ...14...
Страница 21: ...Remove the filter cap by rotating clockwise direction Insert the filter element inside the upper housing 21...
Страница 22: ...Filtered water connected to the sump through the clean water outlet 22...
Страница 24: ...Wash it Clean it well and re insert the same 24...
