Rainier HYBRID DUAL FUEL R4400DF, Руководство пользователя

Страница: 8 / 28

8 |
INSTALLING WHEELS AND FEET
BEFORE ASSEMBLING THE
GENERATOR, REVIEW THE SAFETY
SECTION STARTING ON PAGE 5.
CAUTION
Never lift the generator without
assistance. The generator is heavy
and lifting without assistance could
result in personal injury.
Never use the handles as a lifting point to
support the entire weight of the generator.
Only use the handles to move the generator
by lifting the handles and using the wheels to
move the generator.
Use caution when collapsing the handles.
Hands and fingers could get caught and
pinched.
NOTICE
Assembling the generator will require lifting the unit on one
side. Make sure all engine oil and fuel are drained from the
unit prior to assembling. Once assembled, the wheel kit is
not intended for on-road use. The wheel kit is designed for
use on this generator only.
INSTALLING FEET TO FRAME
1. Place generator on a flat surface.
2. Place a piece of cardboard or other soft material to
tip the generator onto, to protect the frame paint
and prevent the generator from sliding. Tip the
generator onto the side.
3. Install the mounting foot to the frame using M8
flange bolts.
1 - Mounting Feet
2 - Flange Bolts M8
INSTALLING WHEELS TO FRAME
1. Insert axle pin through washer and wheel.
2. Install the wheel with axle pin through the axle
bracket on the frame. The eye of the bolt should be
facing toward the inside of the generator.
2
1
3
Assemble Wheel to Frame
3. Install the hairpin cotter through the axle pin to lock
it in place.
1 - Axle Bracket
2 - Hairpin Clip
3 - Axle Pin
4. Repeat previous steps on other wheel.
INSTALLING HANDLES TO FRAME
1. Install handle bracket
to frame and secure
with the two bolts and
nuts included.
2. Secure the handle to
the bracket with bolt
and nut provided.
3. Install handle stopper with bolt and nut provided.
ASSEMBLY
Wheel Assembly
Assemble Mounting Feet to Frame