www.rainforestautomation.com
EMU-2
™
User Manual
18
EMU-2
™
Configuration Screens
Restart
The
Restart
screen allows you to perform a
device restart by pressing the Top Button.
This will reboot your
EMU-2
™ without
losing the connection to the smart meter.
To access this screen, press both buttons
simultaneously, then release.
Pressing the Bottom Button sends you to
the
Select Language
screen.
Select Language
The
Select Language
screen is used to
change the language displayed by your
EMU-2
™. This screen can only be
accessed in Configuration Mode, after
going through the
Restart
screen. To
enter Configuration Mode, press and
release both buttons simultaneously. Then
press the Bottom Button to get to the
Select Language
screen. The currently
selected language will have an arrow
beside it. Press the Top Button to cycle between the different languages. Press the
Bottom Button to save the selected language. You will then be sent to the
Set Rate
screen.
Set Rate
The
Set Rate
screen allows you to
manually set the current price for electricity
in cents per kWh. This screen can only be
accessed in Configuration Mode, after
going through the
Restart
and
Select
Language
screens. The price shown will
zero, unless it has been previously set in
this screen. The rightmost digit of the price
Set Rate
000.00¢/kWh
Change
Keep
Select Language
English
Select
Español
Français
Accept
Restart?
Restart
Skip
