watch the video at raindrip.com/smart
Installation & Programming
19
Operate controller as a conventional (non-smart) timer.
1. Press SETTINGS.
2. Press ENTER (do not change DATE).
3. Press ENTER (do not change TIME).
4. Change ZIP CODE to all zeroes. Press ENTER.
5. Press ENTER (do not change WATERING
SCHEDULE method).
Smart mode is now disabled.
To enable Smart mode, repeat steps 1-5 above and
enter your local ZIP CODE as shown on page 12.
Conventional Timer Mode Notes:
• The ZIP CODE indicator will flash slowly as a
reminder the controller is in conventional timer mode.
• Disabling Smart mode will not change WATERING
METHOD or WATERING SCHEDULE program.
• TODAY WATER SAVINGS will display 00%.
• Watering durations will not be reduced seasonally.
• Water savings may not be realized.
Disabling Smart Mode
SmrtCntrl_InstlltnPrgrmng_Bklt 3/31/09 4:57 PM Page 19
