26
Starting process timings
DSP 1.8
Depending on the input selected the time varies up to 5 seconds until the DSP retransmits any signal
after a reset.
Exception is STREAM input or USB input operation. The startup process takes
up to 25 seconds
to
ensure a distortion free operation as the initialization of USB interface and WiFi module takes longer
time.
The DSP switches off approx. 5 seconds after its remote input has been switched off. All subsequent
amplifiers connected via remote output switch off immediately to avoid plop noise.
Warranty Terms and Conditions
DSP 1.8
With this consumer warranty, rainbow audio GmbH in Heilbronn, Germany, guarantees a two-year
materials and labor warranty on the product, starting from the time of first use and/or first installation by
the authorized specialist retailer.
The warranty is exclusively limited to free substitution of defective parts, the defectiveness of which is
the result of faulty construction or material defects, as well as to the warranty repair.
A warranty claim does not exist if defects resulted from inappropriate assembly, transport damage,
mechanical damage, or foreign interference.
Accidents, forces of nature or other causes for which Rainbow® cannot assume responsibility, in
particular water and fire, are not subject to warranty.
The EC Declaration of Conformity is available at [email protected].
Version: DGSJ/1.5 - 01/16 Article Nr.: RAC901137
This document is protected by copyright. Any duplication, including printing, in whole or in part, and all
reproductions of diagrams, even in a modified version, is permissible only with the written permission of
rainbow audio GmbH, Germany.
Copyright © 2014-2016 by rainbow audio GmbH. Rainbow is a registered trademark.
