Software/App – Config Page
Setting and changing of all functions
Volume
Set master/sub volume.
Sub
channel (Ch7 and/or Ch8) has been defined as the subwoofer (SUB).
High-/low-pass Filter
Setting the center frequency (Fc),
activating and deactivating of the filter via the switch (I/O).
Phase 180°
Turning the phase of the current channel around 180 degrees via the switch (I/O)
Output level
Setting the volume of the current channel
Delay
Setting the time delay of the curren
Channel
Choosing the channel that you would like to configure
Submenu
Connect with: Chaining
Copy: Copy the configuration to or from another channel
Output Type: NORMAL or SUB. SUB also activ
Default configuration: All settings of this channel will be reset
Change alias: Define a name for this channel
Muting: Mute this channel
Preset
Load: Loading and saving of the current configuration, on the device or in the cloud
Save: Save the current configu
Copy onto: copy current preset into another preset
Default configuration: Resetting all settings
Save in DSP: Final save of programming on the DSP
Delete from DSP: current preset
ATTENTION! ALWAYS USE “Save
OTHERWISE THERE IS A RISK OF DATA LOSS!
Figure 4: Config Page – Channel Submenu
22
Config Page
Setting and changing of all functions
Sub
can only be changed when at least one
channel (Ch7 and/or Ch8) has been defined as the subwoofer (SUB).
frequency (Fc), slope (dB/Oct) and characteristic (But./Bes./Cheb.).
activating and deactivating of the filter via the switch (I/O).
Turning the phase of the current channel around 180 degrees via the switch (I/O)
Setting the volume of the current channel
delay of the current channel
Choosing the channel that you would like to configure
Connect with: Chaining channels in order to configure them simultaneously
Copy: Copy the configuration to or from another channel
Output Type: NORMAL or SUB. SUB also activates the subwoofer volume control.
Default configuration: All settings of this channel will be reset
Change alias: Define a name for this channel
Muting: Mute this channel
of the current configuration, on the device or in the cloud
the current configuration onto another preset
Copy onto: copy current preset into another preset
Default configuration: Resetting all settings
of programming on the DSP
from DSP: current preset will be reset to factory settings
ATTENTION! ALWAYS USE “Save in DSP” WHEN THE PROGRAMMING HAS BEEN COMPLETED!
OTHERWISE THERE IS A RISK OF DATA LOSS!
Figure 5: Config Page – Equalizer Submenu
DSP 1.8
aracteristic (But./Bes./Cheb.). Quick
Turning the phase of the current channel around 180 degrees via the switch (I/O)
channels in order to configure them simultaneously
ates the subwoofer volume control.
of the current configuration, on the device or in the cloud
in DSP” WHEN THE PROGRAMMING HAS BEEN COMPLETED!
