Rainbow CS 275.28 Platinum active Скачать руководство пользователя страница 16

16 

 

Maintenance 

 
The components of the Platinum System should be cleaned at regular intervals as the conditions in motor vehicles 
rapidly cause soiling and a deterioration of the material. Use a soft, moist cloth, and then wipe dry. Do not use any 
solvents or organic detergents. 
 

Warranty 

 
With this user warranty Rainbow provides a 5 year warranty against defective material and workmanship for the 
Platinum Line CS 275.28 beginning with the acquisition of the product by the authorized dealer, is entitled only to 
the direct first buyer, and is non-transferable. 
 
The warranty covers all material and manufacturing defects, however it excludes mechanical defects, defects 
caused by electrical overloading and foreign interference by unauthorized persons. 
 

Mechanical Defects 

Defects resulting from damage to the components during installation, dirt or metal shavings in the open magnetic 
system, inappropriate installation for use not corresponding to the intended range of application. 
 

Electrical Defects 

Damage resulting from electrical and thermal overloading and/or inadmissibly high power supply and clipped 
amplifiers. 
 

Electromechanical Defects 

Damage occurring from operation of the loudspeaker system with too high volumes, inappropriate enclosure 
volume, for example, trunk, etc., and the corresponding damages caused such as burned voice coils and broken lead 
wires. Accidents, acts of God, or others for which RAC cannot be held accountable. In particular, water and fire are 
not subject to warranty. Normal wear and tear is not covered under warranty. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Version: SPJ-SG/1.0 - 09/06 

 

This document is protected by copyright. All duplications and/or reproductions, in full or part, as well as all renditions of the 

illustrations, with or without alterations, are permitted only with written agreement from RAC GmbH & Co. KG. 

 

Copyright © 2006 by RAC GmbH & Co. KG. Rainbow® is a registered trademark. 

Содержание CS 275.28 Platinum active

















Отзывы: