13
Connection of Woofer:
Attach prepared loudspeaker cable (at least 2.5 mm²) at the screw connections „Woofer out” of the crossover (see
fig. 9, No. 5), whereby the marked wire is connected with the positive terminal “+” and the unmarked wire with the
minus connection “-“. Attach the other end of the loudspeaker cable, making sure the polarity (+/-) of the
connections corresponds, and connect to the woofers (see fig. 8)
Connection of Tweeter:
Attach prepared loudspeaker cable (at least 1 mm²) at the screw connections „Tweeter out“ of the crossover (see
fig. 9, No. 6), whereby the black marked wire is connected with the positive terminal “+” and the unmarked wire
with the minus connection “-“. Connect the other end of the loudspeaker cable, preferably with suitable contacts, to
the available connection cable of the tweeters (see fig. 7) and make sure the polarity of the connections
corresponds.
Figure 7: Tweeter terminals.
Figure 8: Woofer terminals.
In order to project a vivid and unobstrusive sound, regardless of the placement of the tweeters, this component
system allows the intensity of the sound
pressure in the tweeter range to be adjusted at the crossover.
Figure 9: Crossover connections
1= Switchboard
2= Bi-Wiring / Bi-Amping Jumper
3= Main-Amplifier
Lwpass-Amplifier terminal
(Bi-Wiring / Bi-Amping only)
4= Highpass-amplifier terminal
(Bi-Wiring / Bi-Amping only)
5= Midbass Output
6= Tweeter Output
7= Exchangeable halogen-bulb
(tweeter-protection)
8= Mounting holes