22
ICOP Embedded 386SX PC/104 AIO CPU Module User's Manual
C h a p t e r 3
SVGA Setup
3.1 Introduction
The ICOP-6052VF has an on-board VGA interface. The
specifications and features are described as follows:
3.1.1 Chipset
The ICOP-6052VF uses a TOPRO TP65081Q for its SVGA controller,
which supports conventional analog CRT monitor or flat panel. In
addition, it also supports interlaced and non-interlaced analog
monitors (color and monochrome VGA) in high-resolution modes
while maintaining complete IBM VGA compatibility. Multiple
frequency (multisync) monitors are handled as if they were analog
monitors.
3.1.2 Display Memory
With 1 MB memory, the VGA controller can drive CRT displays or
color panel displays with resolutions up to 1024 x 768 at 256 colors.
3.2 Flat Panel BIOS and Wiring
Below is a list of optional Flat Panel SVGA BIOS. The VGA BIOS is
combined with the system BIOS in a single. To change to another BIOS
please contact your local dealer.
MLCD.dat
- Data File for MONO DSTN640*480
(Default)
example :
(1) HOSIDEN HLM6667
(2) HITACHI LMG5160XUFC
(3) CASIO MD650TS00-01
(4) OPTREX DMF_50260NFU-FW-8
DSTN.dat
- Data file for Color DSTN640*480
example :
(1) Sanyo LCM-5331-22NTK
(2) SHARP LM64C35P
