Page 10
RMX-1R Receiver
Connect Receiver Cable to Controller
➊
Open the front door of the controller.
➋
Open the face panel of the controller. Refer to the
drawing for the remote-ready Rain Bird controller
you are using.
➌
Run the cable from the RMX-1R
through the wiring opening in
the controller case to the
controller connector.
On the ESP-Si, route the cable
through the notch provided in
the wiring skirt.
On the ESP-LX+, route the cable
through the battery holder.
Align the pins on the connectors
and plug the cable in.
RMX-1Rsande.p65
3/7/00, 10:01 AM
10
