Rain Bird ISM, Инструкция по эксплуатации, Страница: 34 / 42

ISM Installation, Programming & Operation Guide
Page 34
Mount the Sprinkler Timer
1. Hold the template provided against the
wall in the desired mounting location. Use
a pencil to mark the location of the three
holes for the mounting fasteners, as
shown on the template.
2. Use a nail to tap a small pilot hole on each
pencil mark for the mounting fasteners.
Using the mounting fasteners provided,
drive the top two fasteners into the wall.
3. Use the keyhole-shaped slots on the back
of the timer to hang the timer on the two
mounting fasteners. Make sure the shafts
of the fasteners are well up into the narrow
part of the keyhole slot.
4. Remove the lower access cover and drive
the third mounting fastener through the
hole in the timer’s lower access panel.