Rain Bird ISM, Инструкция по эксплуатации, Страница: 30 / 42

ISM Installation, Programming & Operation Guide
Page 30
Manually Run Stations and Programs
in the display, along with its remaining run
time. You can press
Enter to manually
advance to the next station.
When manual operation finishes, the timer
returns to
SYSTEM ON mode and awaits the
next scheduled program start time.
You can run individual stations or an entire
program if you think a particular area needs
additional watering.
Manually Run a Station(s)
1. Turn the Programming Dial to RUN
STATIONS MANUALLY.
2. The number “1” followed by “0” appears in
the display. This means that station
number 1 is set for zero manual run time.
3. If you want to manually run a station other
than number 1, press Enter until the desi-
red station number appears in the display.
4. If you want to manually run the displayed
station, press the (+) or (-) buttons to set
the station’s manual run time (from 1
minute to 240 minutes).
5. Press Enter to begin watering.
6. After setting the manual run time for all
stations desired, turn the Programming
Dial back to
SYSTEM ON. The number of
the first manually operated station appears