5
MANUAL WATERING FOR A PROGRAM
SET
CLOCK &
PROGRAM
STATION
RUN
TIME
WHICH
DAYS TO
WATER
MANUAL
ON/STA.
ADVANCE
TIME OF
DAY TO
WATER
PGM
A
/
C
SYSTEM
OFF
/
AUTO
Station #1, “C” Program
Press
SET
CLOCK &
PROGRAM
repeatedly to get the “PA” display. Then, if you only want to start
Display will indicate:
program “C” press
PGM
A
/
C
Indicates watering will occur, and will count down until watering time is complete.
Note:
When a station is watering, the station number and program will appear as the
first two digits in the display. The digit(s) to the right will blink throughout the watering
time. The manually started program will water all stations on that program and then re-
turn to automatic mode and await the next scheduled automatic start.
ADVANCING TO THE NEXT STATION OF A PROGRAM
(BEFORE PROGRAMMED WATERING IS COMPLETED)
SET
CLOCK &
PROGRAM
STATION
RUN
TIME
WHICH
DAYS TO
WATER
MANUAL
ON/STA.
ADVANCE
TIME OF
DAY TO
WATER
PGM
A
/
C
SYSTEM
OFF
/
AUTO
SET
CLOCK &
PROGRAM
STATION
RUN
TIME
WHICH
DAYS TO
WATER
MANUAL
ON/STA.
ADVANCE
TIME OF
DAY TO
WATER
PGM
A
/
C
SYSTEM
OFF
/
AUTO
Press
MANUAL
ON/STA.
ADVANCE
.
The station which was watering
will stop. The next station in sequence that is as-
signed to the program, will begin watering and
continue through its programmed watering time.
Digits at right of display will blink and count down
until cycle is completed. If digits at right do not
MONITORING STATION
OPERATION
to display the “PC.”
to start the program.
Next, press
MANUAL
ON/STA.
ADVANCE
blink, then press
repeatedly until desired
station number appears at left of display again.
Digits at right should now blink.
STATION
RUN
TIME