4
You can now schedule WHICH DAYS TO WATER. TIME OF DAY TO WATER, and,
STATION RUN TIMES for program "C" by using the same steps you did for program
"A."
TO SET WATERING TIME FOR EACH STATION
SET
CLOCK &
PROGRAM
STATION
RUN
TIME
WHICH
DAYS TO
WATER
MANUAL
ON/STA.
ADVANCE
TIME OF
DAY TO
WATER
PGM
A
/
C
SYSTEM
OFF
/
AUTO
Station #1, “A” Program
Press
STATION
RUN
TIME
.
Press
OR
until the display indicates the number
Display will indicate:
of minutes (from 1-99) you wish for Station #1 to water.
PGM
A
/
C
Will water for 10 minutes
Repeat for remaining five stations. To skip a station, set that station’s watering time to 0
Current station # in “A” Program
Display will indicate:
Indicates no watering
After programming station #6, Press:
STATION
RUN
TIME
If the display reads:
SET
CLOCK &
PROGRAM
SET
CLOCK &
PROGRAM
Flashing digits indicate controller is in
monitor mode.
to return to the display of the current time of day.
The programming for program "A" is now complete.
If you want to use the "C" program, push
repeatedly to get to the "PA" display,
and then press
to display "PC."
PGM
A
/
C
Press
it confirms that no station is active.