4
ESP-Me User Manual
Installation
11 IN.
3 IN.
Installation
Installation Checklist
When installing the ESP-Me controller for the first time, it
is recommended that you complete the following steps in
order.
A check-off box is provided for each step:
Check box contents (see page III)
Gather installation tools (see below)
Select a location
Mount the controller
Connect controller power
Install station modules (optional)
Mount Controller
Choose Location
OR
MOUNT CONTROLLER
IN PROXIMITY TO
ELECTRICAL POWER
SOURCE AS REQUIRED
Connect field wires
Complete the installation
GROUNDED
ELECTRICAL
OUTLET
EXTERNAL
POWER
SOURCE
If a Rain Sensor is installed, turn the dial to Rain Sensor
and set status to “Active” using the + key
Gather Installation Tools
Before beginning installation, gather the following tools
and materials:
b
NOTE:
The operating temperature range is 14
°
F to
+149
°
F (-10
°
C to +65
°
C).
Remove Knock-outs
OPTIONAL
a.
Marking pencil
b.
Phillips screwdriver
(#1, #2, #3 tip)
c.
Flathead screwdriver
d.
Hammer
e.
Level
f.
Drill and drill bit
(for #8 screws)
g.
Wire Stripper
h.
Mounting Screws
(included)
i.
Wall Anchors
(if needed)
a.
f.
b.
c.
g.
d.
h.
e.
i.