19
RailKing F-3 AA Set Operating Manual
Programming For Horn In Neutral Operation
-
Reset Feature 25
-(5 Clanks)
Reset Feature 25 allows you
to operate the Horn while the
engine is in the Neutral state.
When ON, pressing the
Horn/Whistle button while in
Neutral, with 10V AC or less
on the track, will cause the
Horn recording to sound. To
use, cycle to Reset 25 and
press the Horn/Whistle button. The engine will play a series of bells. This
indicates the current setting. Each time the Horn/Whistle button is pressed,
Proto-Sound® will cycle to the next available setting and provide the
appropriate bell indicator. The settings for Reset 25 are 1 Bell = OFF, 2
Bells = ON. When the desired setting is reached, lock the changes by
interrupting the throttle and cycling the engine into forward.
Programming For Proto-Coupler® Operation
-
Reset Feature
10-(2 Clanks)
Reset 10 allows you to turn
the operation of the
Proto-Coupler® on or off.
When OFF, the coupler will
not arm or fire from
Neutral. To use, cycle to
Reset 10 and press the
Horn/Whistle button. The
engine will play a series of
bells. This indicates the
current setting. Each time the Horn/Whistle button is pressed,
Proto-Sound® will cycle to the next available setting and provide the
appropriate bell indicator. The settings for Reset 10 are 1 Bell = ON, 2
Bells = OFF. When the desired setting is reached, lock the changes by
interrupting the throttle and cycling the engine into forward.
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
25 Times
Listen For 5 Clank
And 0 Clink Sounds
Push The Whistle Button
Until You Hear
2 Bell Dings
Interrupt The Throttle
To “Lock-In”
The Horn Setting
H
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
10 Times
Listen For 2 Clank
And 0 Clink Sounds
Push The Whistle Button
Until You Hear
2 Bell Dings
Interrupt The Throttle
To “Lock-In”
The Coupler Setting
H
