18
RailKing F-3 AA Set Operating Manual
Remotely Adjusting The Engine Volume -
Reset Feature 6 – (1
Clank, 1 Clink)
Reset Feature 6 allows you to change the volume setting of the chuff sounds
without affecting the volume of other sounds, such as whistle, bell,
enhanced neutral sounds, etc. To use, cycle to Reset 6 and press the
Whistle button. A single bell will play, and the chuff will begin at the
current volume. Each time the Horn/Whistle button is pressed, a bell will
sound and the volume setting will cycle down to the next level. The levels
available are 100%,
50%, 25%, and 0%.
After 0%, pressing the
horn/whistle button
again will return the
chuff to 100%. When
the desired level is
reached, lock the
changes by interrupting
the throttle and cycling the engine into forward
Programming For Squeaking Brake Operation-
Reset
Feature 45
–(9 Clanks, 0 Clinks)
Reset Feature 45 allows you to determine if and how the Squeaking Brakes
recording will be activated. To use, cycle to Reset 45 and press the
Horn/Whistle button. The
engine will play a series
of bells. This indicates
the current setting. Each
time the Horn/Whistle is
pressed, Proto-Sound®
will cycle to the next
available setting and
provide the appropriate
bell indicator. The settings for Reset 45 are 1 Bell = On Demand (Enabled
when PFA is activated), 2 Bells = Always On, 3 Bells = Off. When the
desired setting is reached, lock the changes by interrupting the throttle and
cycling the engine into forward.
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
6 Times
Listen For 1 Clank
And 1 Clink Sounds
Push The Whistle Button
Until You Reach The
Setting You Desire
Interrupt The Throttle
To “Lock-In”
The Volume Setting
H
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
45 Times
Listen For 9 Clank
And 0 Clink Sounds
Push The Whistle Button
Until You Hear The
Appropriate # Of Dings
Interrupt The Throttle
To “Lock-In”
The Brake Setting
H
