8
RailKing GG-1 Electric Engine
Lock into a Directional State:
You can lock your engine into a directional state (forward, neutral, or reverse)
so that it will not change directions. To do this, put the engine into the
direction you want or into neutral. To lock it into forward or reverse, run it at
a very slow speed (< 10 scale mph), and quickly but firmly press your
remote’s Whistle button once followed immediately by three presses of the
Bell button. The engine will not change direction (including going into
neutral) until you repeat the 1 whistle, 3 bells code to return the engine to its
normal state. To lock your engine into neutral, place engine in neutral and set
the track voltage to less than 10v. Then use the same 1 whistle, 3 bell code
to lock and unlock your engine from neutral.
Reset to Factory Defaults:
To override the settings you currently have assigned to the engine and reset it
to its factory defaults, quickly press the Whistle button once, followed
immediately by five quick pushes of the Bell button.
Automatic Sounds:
Certain Proto-Sound 2.0 sound effects automatically play in programmed
conventional mode conditions:
Squealing Brakes
play when the engine’s speed is decreased by 50% +5 scale
MPH.
Cab Chatter
plays when the engine idles in neutral.
Engine Start-up and Shut-down
sounds play when the engine starts up and
shuts down.
