Placing the Engine on the Track
Place the engine on the track, then insert the reverse unit plug that extends out of
the tender into the receptacle at the back of the boiler cab.
WARNING: DO
NOT CONNECT THIS ENGINE TO A TENDER FROM ANOTHER
ENGINE; IT MAY CAUSE SERIOUS DAMAGE.
Look at the bottom of the
engine and tender where each will have a sticker. If they match you may connect
those two pieces; if not, don’t.
Connect the draw bar between the engine and tender. The draw bar hole located
farthest from the tender is for applications such as display. The second hole is for
normal operation on the track.
Be Sure Cable Loops Upward
Plug tender plug into boiler socket at the back of cab.
RailKing 4-6-0 Steam Freight/Passenger Set with Proto-Sound® 2.0
6
Checking the Battery
You may find, if your set was built several months before you set it up, that the rechargeable
battery has run down and needs to be charged before operating. If you notice that the
sounds are garbled, test and charge the engine as described in the "Self-Charging Battery
Back-Up" on page 23.
Manual Volume Control
-
To adjust the
volume of all sounds made by this engine, turn
the manual volume control clockwise to increase
the volume and counter-clockwise to decrease
the volume.
Manual Volume Control
(on bottom of tender)
