6
7
Operating Instructions
1. Power on/off
- Power on: Thermometer will automatically power on when it is worn under the
armpit. (Note: When use thermometer for the first time or just change a new battery,
you should tightly touch temperature probe of thermometer with your palm until LED
blink indicates power-on, and then connect the thermometer with receiver to sync time
before wearing.)
- Power off: Thermometer will automatically power off when it is taken off from armpit.
2. LED indicators
- Single blink in one-second period indicates that thermometer needs to sync time with
receiver.(by connecting with receiver)
- Single blink in four-second period indicates that thermometer successfully powers on.
- LED long brightness indicates battery low and cannot continues to work, please
change with new button cell.
3. Frequently operating modes
- Connect to receiver for the first time to sync time
：
1) Turn on receiver and
open Bluetooth
, and make sure receiver’s access to internet.
2) Turn on the thermometer.( Tightly touch temperature probe of thermometer with
your palm until LED blink indicates power-on)
3) Run "iFertracker" on the receiver and sign in
，
put thermometer on the top of
receiver, the two devices will automatically connect and sync time.
“Connect to receiver for the first time” means the following situations
：
1. Right after
uploading a new battery. 2. Right after upgrading Firmware. 3. Anytime when you see
LED’s single blink in one-second period. When you are in these three situations, just
connect thermometer with receiver to sync time before wearing.