Raidon ST7610-4S-S2, Руководство пользователя

Страница: 7 / 20

6
B.RAID CARD Mode
a. Install the RAID CARD into the PCI slot on the PC (Note). Connect the ends of the
four eSATA-to-eSATA cables to the SATA interface on the RAID CARD and connect
the other ends of the eSATA-to-eSATA cables to the eSATA ports on the ST7610.
Make sure the screws on the bracket are fastened and the eSATA connectors are
secured.
b. After ensuring the device is installed successfully, power on the ST7610 first and then
turn on the PC when the ST7610 runs normally. Users may use the optional RAID
CARD to set up the RAID level (please refer to the user manual for the RAID CARD).
SA
T
A
SA
T
A
SA
T
A
SA
T
A
ST7610 eSATA Ports eSATA cable
eSATA
1
2
3
4
eSATA
RAID Card
PCI Slot
Computer Case
1. We strongly recommend purchasing an external SATA II (3.0 GHz) card to enhance compatibility and transmission
efficiency. Please be advised that the external card should work properly before the ST7610 incorporates with the
external card to be a highly efficient external enclosure storage system.
2. PCI-X SATA II is available on the RAIDON web site, which is an alternative solution for customers who do not have
the SATA II interface on their motherboards or are in need of high-speed data transmission.
3. When using the external RAID card, please follow the manual to install the RAID system provided by its manufacturer.
Only when the RAID card operates normally shall ST7610 incorporate the card to become a highly efficient RAID
system.
4. Users may use commercially available RAID cards provided by RAID manufacturers such as Areca, 3ware, High Point
and Promise RAID card for a highly efficient RAID system.
Hardware Installation Procedure