Raidon ST7610-4S-S2 Скачать руководство пользователя страница 18

Q: Does it need additional drivers to run ST7610 in different operating systems?

A: No. Users do not need any additional driver to run in different operating systems. 

 

RAIDON systems support a variety of operating systems, e.g. Window XP, Linux, and 

 

Macintosh, etc. which are compatible with SATA interface.

Q: Is ST7610 compatible with any hard disk drive?

A: The product has no problem with hard disk drive compatibility. RAIDON provides the 

 

SATA II interface, which is a cost-efficient system with high performance. Please feel free 

 

to contact us for any hard disk drive compatibility problem.

Q: What can I do if I turn on my PC, but the system BIOS cannot detect the hard disk drive?

A: 1.  Typically ST7610 fails to detect the hard disk drive because of improper connection. 

 

 

To solve this problem, you can try the following procedure: 

 

 

(1) Power off the system. 

 

 

(2) Turn off the PC. 

 

 

(3) Make sure the cables are connected properly. 

   (4) 

Restart 

ST7610. 

 

 

(5) Repeat Step (1) to Step (4) for three times. 

 

 

Please wait at least 5 minutes between each attempt. If the system BIOS still fails to 

 

 

detect the hard disk drive, make sure the installation and connection procedures are 

 

 

compliant with regulations described in the manual.

 

2.  Install SATA II (3.0 GHz) PCI interface to enhance compatibility. 

 

3.  If the hard disk drive cannot still be detected, please contact us via phone or contact 

 

 

our technical support directly through the RMA system.

Q: Why can’t I use the storage device in the operating system, even the system BIOS has 

 

detected the hard disk drive?

A: 1.  Please refer to the  Hardware Installation Procedure & Hard Disk Drive Format 

 

 

Procedure  In the Quick Installation Guide and make sure the storage devices have 

 

 

been installed successfully.

 2. 

New hard disk drives can only be displayed in the system after disk partition and format.

Q: Does ST7610-4S-S2 work as RAID?

A: The ST7610 series are purely external storage devices. In addition to some specific models 

 

(e.g. ST7610-4S-WBC) that feature RAID 0 function, ST7610-4S-S2 may incorporate the 

 

external eSATA II RAID card to set up a RAID system, which can be regarded as a RAID 

 

system of high efficiency and reliability. For any product-related questions, please refer to 

 http://www.RAIDON.com.tw.

Frequently Asked Questions

Frequently Asked Questions

17

Содержание ST7610-4S-S2





















Отзывы: