1. After power ON and before entering standby screen, click on ENTER key, you will enter into product
function setup options (product default password is: 0000)
2. Upon booting, the standard standby screen will display the hard disk operation status.
3. It will display product model/RAID level/firmware edition.
4. It will display system temperature.
5. It will display fan rotation.
6. There are two functional setup options, one of them is RAID level setting, and the other is login
password setting.
7. The factory default setting of RAID level is RAID-1, therefore, upon entering, you will be asked
whether or not to change RAID-0. A change of RAID level would cause the original hard disk data to
get lost, please pay special attention to it.
8. Use UP/DOWN key to input custom password. Password changing is to allow users to customize
their personal preferences. After it has been changed, please record the password personally.
Should you forget about it, it would cause disturbances to application.
Up
SETUP PASSWORD
YES NO
Down
Enter
EnterE
nter
EnterE
nter
Enter
6
8
7
PASSWORD
0000
CHANGE RAID MODE
YES NO
RAID - 0 MODE
YES NO
DATA WILL LOSE
YES NO
PASSWORD : 0000
YES NO
Raid Mode Changed
Pls Reboot Sys
SETUP PASSWORD
OK
Installation of GR3630
17
