Product Diagrams and Contents of Product Package
Precautions Before Application
After you open the outer package, make sure that the following items are contained
in the package:
Please check the product and accessories for any defect or missing parts.
If you have any questions, please contact your product supplier.
Please visit the official website (www.raidon.com.tw) to download user
manuals, drivers and other related resources.
˙
˙
F
G
H
LED Indicator
A
Removable drive tray
B
HDD Tray Ejection
C
HDD tray key lock
D
Mute Button
E
15 PIN Power Connector
F
SATA Port
G
RAID Switch
H
Front View
Rear View
iR����-S� body
x�
Quick Guide
x1
Screws and key
A
C
E
B
Please install iR8777-S3 as the following instruction.
Hardware Installation
The RAID mode is set by jumper in the RAID mode switch on the backplane.
The default value is RAID 1.
Install the product unit into the comput er chassis and make the necessary
connections and mount the product unit properly and securely to the bay
position desired.
1.
2.
Mounting Positions
※
We suggest you using 2 brand new 2.5-inch SATA hard drives with the same
brand and model number for the best performance. When any one of the
hard drives is failed, please ensure that the capacity of the new hard drive is
the same or bigger than the original one.
Please ensure that the hard drives are free of bad tracks before using,
otherwise, it may cause system crash in turn resulting in data loss.
We strongly suggest you that the RAID mode should be decided before
starting use iR8777-S3. If you need to reset the RAID mode after using
iR8777-S3, please remember to backup your data on the other hard drives or
the data may lose.
A reboot is required after adding or changing RAID mode to ensure that the
update is completed to the new RAID mode.
We strongly recommend you to keep an extra copy at your important
personal data other than stored in your iR8777-S3 product. RAIDON will not
be responsible of your data loss problem.
1.
2.
3.
4.
5.
Raidon
iR����-S� Quick Installation Guide
D
LED Instruction
Contents of Product Package
RAIDON
is one brand under
RAIDON TECHNOLOGY, INC.
Thank you for choosing
RAIDON’s
product.
The information provided in this manual was checked before publication, but the actual
product specifications may have changed before shipping; Latest product specifications
and updates can be found at
www.RAIDON.com
.tw or through your sales representa-
tive. No separate notifications will be provided by our company.
If you have any questions about RAIDON products or would like to receive the latest
product information, instruction manuals, or firmware, please contact S
upport-
for assistance.
All product-related content in this manual are copyrighted by
RAIDON TECHNOLOGY, INC.
Constant
HDD Status Light
Buzzer
M.2
Idle
Blue light always on
N/A
Data access
N/A
No
M.2
/
M.2
failure
Red light always on
ON
Rebuilding - Source
N/A
Rebuilding - Target
N/A
Red light flashing
Purple light flashing
Blue light always on
v1.0(Sep. 2023)
9. When hardware installation is completed, you can turn on the power of the main
unit to proceed with relevant settings and applications.
10. Installation completed. Your operating system should automatically detect the
hard drives within. Please proceed to format the drives. Once formatting is
completed, you may then start to operate the device.
Lock
Unlock
6. Insert M.2 and
fix the screw.
5. Open the upper
cover and remove
the screw .
�.
Put the upper
cover back.
�.
Fix the screws.
Install the M.2
SATA Bridge tray
back into the ir8777
RAID 0 Mode
RAID 1 Mode
Screw positions to Mount
like a 3.5" hard drive
Screw positions to mount like a floppy
drive
3. For the 2.5" HDD tray, please use the key included in the accessory kit to unlock
the 2.5" HDD tray key lock and push the HDD eject button to the right, the 2.5"
HDD tray handle will pop up to remove the tray.
4. Pull out the M.2 SATA Bridge tray set, and remove the 2 screws on the upper
cove
r.
1.
2.
