Raidon iR2880-8S-U5 Скачать руководство пользователя страница 2

Страница: 2 / 41

Introduction

About this Manual

Thank you for using products of the

RAIDON Technology Inc.

This manual introduces the

RAIDON GR/iR2880 SAS

series products and briefs you about the

operations of disk array (RAID) systems. Actual specifications of your products are subject to the

physical ones shipped to you in spite of that contents of the Manual have been thoroughly reviewed

before release. Updates of products specifications and/or any products related information may be

made at any time without notice. Please visit our web site at

www.raidon.com.tw

or contact with local

sales representatives for latest information.

If you have any question with products of the

RAIDON Technology Inc.

or you need the latest product

information, user’s manual and firmware please contact us at

[email protected]

. We’ll reply

you as soon and fast as possible.

NOTE: the

RAIDON Technology Inc.

only provides technical support and services to direct customers. For

consumers and/or customers who bought our products at retailers or our dealers please contact them for

better supports and faster services. If your products are not purchased directly from the

RAIDON Technology Inc.

please do not contact us for supports as you may get no response from us.

RAIDON Technology Inc.

Содержание iR2880-8S-U5










































Результаты поиска

Содержание iR2880-8S-U5

Отзывы:

Похожие инструкции для iR2880-8S-U5

Бренды по названию

Популярные бренды

Raidon iR2880-8S-U5, Руководство пользователя

Результаты поиска

Содержание iR2880-8S-U5

Отзывы:

Похожие инструкции для iR2880-8S-U5

Бренды по названию

Популярные бренды