Chapter 7 Computer Set Up
When the hardware setup for iR2620 / SR2611 is complete, you are now ready to turn the
machine on.
1. After the hardware installation is complete, the iR2620 / SR2611 will be treated as one
single hard drive. Set the hard drive to AUTO in the computer’s BIOS. When the
computer is turned on, the system will retrieve the following information:
2. In iR2620 / SR2611, the installed hard drive can be detected by the Device Manager of
Computer Management for Windows.
3. Customers can choose to format the hard drive by using the Disk Management tool of the
operating system before using the iR2620 / SR2611.
At this point, the installation process is completely finished. The user can freely retrieve and
save data to iR2620 / SR2611 just like retrieving and saving data to a regular hard drive.
If the user experiences any abnormality during the operation, please refer to the trouble
shooting Q&A section in Appendix.
Computer Set Up
9
