Raidon InTANK iR2771-S3, Руководство пользователя

Страница: 5 / 21

iR2771-S3 & iR2772-S3 User Manual
3
4. Hardware Installation Procedure
Please install iR2771-S3 / iR2772-S3 as the following instruction.
Choose the RAID mode with RAID switch on the back panel. The default value is RAID 1.
Install the product unit into the computer chassis and make the necessary connections
and mount the product unit properly and securely to the bay position desired.
Step 1
Step 2
Note :
Once the drive mode configuration has been completed, re-configuration using the same hard
drives to set the drive mode will result in complete data loss. If you must change the drive
mode, make sure to backup all data prior to the mode change.
3. You are strongly advised to set the storage mode (the default is the Independent mode) before
using the iR2771-S3 / iR2772-S3.
4. The product allows the user to simultaneously utilize two hard drives manufactured by different
companies. However, if the user expects better efficiency, we strongly recommend the users to
use hard drives manufactured by the same manufacturer.
5. Please make sure that the two hard drives are free from bad blocks or defects prior to installation
in order to avoid system crashes or data loss.
6. The actual storage capacity of iR2771-S3 / iR2772-S3 recognized by the system may differ from
the total capacity stated on the hard drives combined once the drives have been formatted.
7. It is highly recommended for users to back up important data contained within theiR2771-S3 /
iR2772-S3 unit on a regular basis or whenever the user feels necessary to a remote or a separate
storage device. RAIDON will not be responsible for any lost of data caused during the use of the
unit or the recovery of the data lost.
RAID 0 Mode RAID 1 Mode