Raidon InTANK iR2622S, Руководство пользователя

Страница: 5 / 24

iR2622S User Manual
3
2. Operating Information
3. Hardware Requirements and Precautions
Operating Temperature : 0 ~ 40 " C (32 ~ 104 " F)
Storage Temperature : -10 ~ 70 " C (14 ~ 158 " F)
Line Voltage : 12V + 5V DC
1. Computers or servers must be with SATA I, SATA II, or SATA III.
2. Hard drive must be with SATA I, SATA II, or SATA III.
3. Once the drive mode configuration has been completed, re-configuration using the same hard
drives to set the drive mode will result in complete data loss. If you must change the drive mode,
make sure to backup all data prior to the mode change.
4. All existing data will be deleted when this product is set up for the first time. Please ensure that all
data on the hard disk has been backed up before installation to avoid data loss.
5. Please make sure that the two hard drives are free from bad blocks or defects prior to installation
in order to avoid system crashes or data loss.
6. The usable storage capacity of the hard disk after formatting will be less than the capacity
indicated on the hard disk.
7. It is highly recommended for user to back up important data contained within the iR2622S unit on
a regular basis or whenever the user feels necessary to a remote or a separate storage device.
RAIDON will not be responsible for any lost of data caused during the use of the unit or the
recovery of the data lost.