Raider Solo RDP-SCDI20S, Руководство пользователя

Страница: 12 / 94

12 www.raider.bg
Original instructions’ manual
Dear Customer,
Congratulations on the purchase of machinery from the fastest growing brand of electric and pneumatic tools - RAIDER.
When properly installed and operating, RAIDER are safe and reliable machines and work with them will deliver a real
pleasure. For your convenience has been built and excellent service network of 45 service station across the country.
Before using this machine, please carefully acquainted with these “instructions for use.
In the interest of your safety and to ensure proper use and read these instructions carefully, including the recommendations
and warnings in them. To avoid unnecessary errors and accidents, it is important that these instructions will remain available
for future reference to all who will use the machine. If you sell it to a new owner “Instructions for Use” must be submitted along
with it to enable new users to become familiar with relevant safety and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner of the trademark RAIDER.
Adress: Sofia City 1231, Bulgaria “Lomsko shausse” Blvd. 246, tel +359 700 44 155, www.raider.bg; www.euromasterbg.
com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope of certification: Trade,
import, export and servicing of hobby and professional electrical, mechanical and pneumatic tools and general hardware. The
certificate was issued by Moody International Certification Ltd, England.
TECHNICAL DATA
Parameter Units of measurement Value
Type of model
- RDP-SCDI20S
Rated voltage
V DC 20
No-load speed
min
-1
I 0-440 / II 0-1600
Impact rate min
-1
0-25000
Chuck size
mm 13
Torque control range
- 20+1
Мanual gearbox
- 2
Max. torque force
Nm 50
Description of drawing:
1. On/Off switch
2. Rotational direction switch
3. Select the functions
3.1. Torque control
3.2. Drilling function
3.3. Impact function
4. Quick tightening chuck
5. Adjustment speed knob
6. Additional handle
7. LED lamp
1. General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric shock,
fire and / or severe injuries. Keep these instructions in a safe place.
1.1. Safety in the workplace.
1.1.1. Keep your workplace clean and well lit. Disarray and poor lighting may contribute to the
occurrence of an accident.
1.1.2. Do not operate in an environment where the cordless drill with an increased risk of an
explosion in the vicinity of flammable liquids, gases or powders.
EN